- Signal strength is displayed on the large-screen LCD. Bars, arrows, and voice prompts assist the operator in determining the cable and fault location underground. It can be operated by a single person.
- All-digital design with a clear large-screen LCD graphic display, ensuring reliable positioning.
- Portable and lightweight for easy transport.
- Features a built-in rechargeable battery.
- Equipped with a built-in ohmmeter for measuring cable loop resistance.
- Can detect insulation faults up to 2MΩ to ground.
- Backlight function for night operation.
- Displays cable depth and current.
Transmitter:
| Working frequency | low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz) |
| Working mode | direct connection method, coupling method (caliper method), induction method |
| Matching load | 5 ohms-3000 ohms |
| Impedance display | 5 digits |
| Overheating and over current | automatic protection |
| Power output | low gear, middle gear, high gear |
Receiver:
| Working frequency | low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz), Passive frequency 50Hz |
| Antenna mode | valley method (zero value mode), crest method (peak mode), step voltage method and clamp current method (A-frame) |
| Current indication | display the effective current value of the cable under test (unit: mA) |
| Working temperature | -10ºC+55ºC |
| Power indicator | graphic display |
| Battery life | continuous work> 8 hours: intermittent work> 16 hours |
| Signal strength indication | ladder diagram, digital range 0-999 |
| Gain control | manual adjustment, dynamic range of 100dB |
| Detection depth | the maximum detection depth is around 10 meters |
| Maximum detection distance | The cable with good insulation can be up to 15km in the direct connection method |
| Depth measurement | press the depth key to display three digits, the maximum depth can be measured up to 10 meters |
| Accuracy | Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m |
Underground Cable Pipe Locator
Transmitter frequency: from 815Hz-83KHz(4 kinds)
Output power: maximum 10W
Output current: 0~2A
Battery model: rechargeable lithium batteries
Receiving frequency: Detection frequency from 815Hz-83KHz
Passive frequency: 50Hz, radio
Depth measurement: 10 meters
Positioning accuracy : Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m
Maximum detection distance: The cable with good insulation in the direct connection method can reach up to 15km.
XHGX507 underground cable pipe locator is mainly used for cable fault location, cable identification, cable path and depth measurement. It can complete tasks that could only be accomplished by a few sets of instruments in the past.
